How to Fix a Leaky Faucet Without Calling a Plumber

Don’t let the dripping in your bathroom or sink drive you nuts. The drips that you may be ignoring are contributing to your higher water bills and irritating noises. These drips will always form water pools under the sink or in the bathroom. Why pay a plumber when you can fix the broken taps yourself. You need three basic tools a wrench, a pair of pliers and an adjustable wrench and not forgetting the simple instructions in this article. This article will take you through a few simple steps on how to fix leaky faucet all by yourself.

Step 1

Before undoing any nut or pipe always make sure that the water supply is turned off. If you forget to do so, you might end up in a bigger pool of water and a bigger mess. Turn off the valve on the main supply by turning the tap clockwise until it is fastened this will is turned off the water supply. Open the sink tap just to be sure the water supply is turned off.

Step 2

After making sure that there is no more water in the tap, Remove any form of decorations that may be part of the tap. Nuts or bolts rarely fasten these decorations and for this reason, removing them is easy all you need is a screwdriver or a blade. Most of the decorations and labels are just fixed with glue so use a blade or a screwdriver to peel them off. These decorations are important to remove since most of the screws and nuts are placed under them.

Step 3

fixing a pipeDetermine what your faucet is made up of. Check for a faucet ball, cartridges and a ceramic cylinder that may be contained in a ceramic-disk faucet. With all these parts in place, you can start disassembling your faucet with you wench. Using the adjustable wrench start by removing the handle. Do this by unscrewing the handle that may be mounted under the adjustable knobs.

They are often mounted on the stem of the tap with a nut. Loosen the nut with your wench until it is removed completely and lift off the handle. Due to water corrosion and rust, the screwed parts may be hard to remove. It is advisable to use oil to lubricate them and make easy to undo and remove.

Step 5

The faucet stem will always be secured to the basin. Using a wrench, remove the screws that hold it to the basin. The stem will be on top of O-ring and a washer. Inspect the o-ring and see if it is the part that causes the leak also do not forget to do the same for the washer. If they are worn out, replace them with those that are similar to them. Make sure to carry the washer and o-ring to the store just to be sure to buy the right replacement fit for them.

READ ALSO: Best Bathroom Faucets To Try This Year

Step 6

At this point, reassemble all the removed part carefully. Having made sure that the faucet is as it was before we started fixing it, gently open the main water source and also do the same for the fixed faucet. Check if the leak is resolved.  If it is resolved completely then you know how to fix leaky faucet. Open the faucet again and make sure that everything is in place before tightening firmly.

Step 7

Finally, If by any chance you notice that there is a leak, then you will be sure that the cause of the leak is not solved,  then the problem could be emanating from a different source. Some of this leaks may be caused by corrosion of the valve seat. To prevent this make sure you clean your faucet seat as frequent as possible. Never call a professional plumber that thinks they know how to fix leaky faucet and may end up taking longer and doing a shady job and you fix this by yourself. To prevent the leaks faucet leaks in future it is important that you keep your sink clean   that means you also clean your faucet, tighten loosened parts of the faucet with a pliers or a wench, check for worn out seals regularly to avoid surprises

 

You might also like

Leave a Reply

Your email address will not be published. Required fields are marked *

nineteen + six =